- ページ 5

ミキサー Digital Audio Labs LIVEMIX MIX-32のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Digital Audio Labs LIVEMIX MIX-32 15 ページ。 Central mixer and power distributor
Digital Audio Labs LIVEMIX MIX-32 にも：ユーザーマニュアル (15 ページ)

ページを印刷する

CONTENTS OF BOX

• MIX-16/32

• External Power Supply

INTRODUCTION

The MIX-16/32 is the central mixer and of the Livemix system. Although the mixing is controlled by

the personal mixers, much of the actual mixing occurs in the MIX-16/32. The MIX-16/32 provides:

• 24-channel digital input

• 24-bit digital mixing and processing

• Power and audio distribution to attached personal mixers over a single network cable

• 16 discrete monitor mixes with the MIX-16

• 32 discrete monitor mixes with the MIX-32

• USB Connection to Windows PC or Apple computer

ANATOMY OF THE MIX-16/32*

FRONT

REAR

MIX-16/32

MIX-16

1. EXTERNAL POWER SUPPLY CONNECTOR: Connect the included power supply to this jack.

Only use the power supply that is supplied with your MIX-16 or MIX-32. The MIX-16 is supplied

with a 24V / 3.75A power supply. The MIX-32 is supplied with a 24V / 5A power supply. Contact

support for a replacement power supply if necessary.

2. LIVEMIX DATA IN: If using an analog input source and the AD-24, connect a shielded CAT5

or CAT6 cable from the Livemix Data Out port on the AD-24 to the Livemix Data In on the MIX-

16/32. This will be unused if using the Dante Option Card.

3. POWER SWITCH: This switch turns power on/off to the MIX-16/32 unit. The MIX-16/32 supplies

power to connected Livemix personal mixers. Turning the power on/off will also power on/off all

connected personal mixers.

LIVEMIX MIX-16/32

LIVEMIX

DATA OUT

STEREO MIXES 17-32 (MIX-32 ONLY)

MIX-16

LIVEMIX

DATA OUT

DATA IN

STEREO MIXES 1-16

24VDC

3.75A

* MIX-16 pictured