制御システム Crestron 4K DigitalMedia 3-SeriesのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Crestron 4K DigitalMedia 3-Series 8 ページ。 Media presentation controller
Crestron 4K DigitalMedia 3-Series にも： 補足マニュアル (20 ページ), クイック・スタート・マニュアル (2 ページ), マニュアルより (2 ページ), クイック・スタート・マニュアル (7 ページ), クイックスタート (2 ページ), マニュアルより (2 ページ), マニュアルより (2 ページ)
ページを印刷する
DMPS3-200-C, DMPS3-300-C, & DMPS3-300-C-AEC
3-Series® DigitalMedia™ Presentation Systems
The Crestron® DMPS3-200-C, DMPS3-300-C, and
provide complete presentation control and signal routing solutions for
boardrooms and classrooms. Each integrates the control system,
multiformat matrix switcher, mic mixer, audio DSP, amplifier, and
DigitalMedia distribution center all into a single 3-space rack-mountable
package. Built-in .AV Framework™ enables simplified configuration and
control without programming.
In the Box
1
DMPS3-200-C, DMPS3-300-C, or DMPS3-300-C-AEC,
3-Series DigitalMedia Presentation System
Additional Items
2
Bracket, Rack Ear, 3U (2033588)
3
Connector, 2-Pin (2012361)
1
Connector, 3-Pin (2003575)
4
Connector, 4-Pin (2003576)
2
Connector, 8-Pin (2003580)
4
Foot, 0.5 in. x 0.5 in. x 0.23 in., Adhesive (2002389)
1
Cable, Power, 6 ft 7 in. (2 m) (2001134)
6
Screw, 6-32 x 5/16 in., Undercut, Phillips (2007223)
DMPS3-200-C Only
13
Connector, 5-Pin (2003577)
DMPS3-300-C and DMPS3-300-C-AEC Only
15
Connector, 5-Pin (2003577)
DMPS3-300-C-AEC
The DMPS3-200-C, DMPS3-300-C, & DMPS3-300-C-AEC can be
mounting into a rack or placed on a flat surface.
Mount into a Rack
The presentation system occupies 3U of rack space. Use the three screws
from the front part of each side panel, and a #1 or #2 Phillips screwdriver
to attach the two included rack ears to the device, as shown in the
following illustration. Then mount the device into the rack using four
mounting screws (not included).
Rack Mounting Safety Precautions
Elevated Operating Ambient Temperature: If installed in a closed or
multi-unit rack assembly, the operating ambient temperature of the rack
environment may be greater than room ambient temperature. Therefore,
consideration should be given to installing the equipment in an
environment compatible with the maximum ambient temperature (Tma)
specified by the manufacturer.
Install the Device
Quick Start
1