- ページ 4

制御システム Crestron CP4-RのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Crestron CP4-R 6 ページ。 Control processor for crestron home os
Crestron CP4-R にも：クイックスタート (2 ページ), クイック・スタート・マニュアル (2 ページ)

ページを印刷する

CP4-R

4-Series Control Processor for Crestron Home™ OS

Attach the IR Emitter

1. Peel off the clear adhesive strip on the back of the IR emitter shell and

the IR mask (if attached).

2. Affix the IR emitter by pressing it firmly to the desired location on the

front panel of the controlled device.

If the IR emitter must be removed and repositioned for any reason, it may

be necessary to replace the adhesive on the IR emitter with a new piece of

two-sided tape.

NOTE:

The IR emitter is a pure infrared emitter that does not emit any

visible light. To test that the IR emitter is working properly, trigger an

IR command from the CP4-R. Then, use a digital camera device (such

as a smart phone) to record a video of the IR emitter while it is being

triggered. If the IR signal is visible in the video during playback, the IR

emitter is working properly.

Pair with Apple HomeKit

The CP4-R can be paired with Apple® HomeKit® technology to enable

communication between the Crestron Home system and Apple HomeKit

devices and accessories.

For pairing instructions and to locate the unique QR code required for

pairing, refer to the CP4-R Compliance document (Doc. 8547) that

shipped with your CP4-R.

Install the Setup App

The Crestron Home Setup app is used to configure the Crestron Home

system. The Crestron Home Setup app is available from the App Store®

online store and may be downloaded onto an Apple® iOS® device such as

an iPad® device. An Apple ID is required to download the Crestron Home

Setup app.

For a comprehensive list of iOS® hardware and software versions that

are compatible with Crestron Home, refer to

To install the Crestron Home Setup app:

1. Tap the App Store icon

on the iPad device home screen.

2. Tap the search field, and enter the search term "Crestron Home

Setup."

3. Tap Search.

4. Tap the Crestron Home Setup app icon

5. Follow the prompts to download and install the app to the device.

Quick Start

online help article

5655.