- ページ 10

制御システム Crestron FlipTop FT2 SeriesのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Crestron FlipTop FT2 Series 11 ページ。 Ac power outlet modules
Crestron FlipTop FT2 Series にも: クイックスタート (2 ページ), クイックスタート (2 ページ), クイック・スタート・マニュアル (11 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (11 ページ), クイック・スタート・マニュアル (9 ページ), クイック・スタート・マニュアル (9 ページ), はじめに (2 ページ), はじめに (2 ページ), はじめに (2 ページ), マニュアル (2 ページ), マニュアル (2 ページ), マニュアル (2 ページ), クイック・スタート・マニュアル (7 ページ), クイック・スタート・マニュアル (8 ページ), クイックスタート (2 ページ), クイック・スタート・マニュアル (2 ページ), クイックスタート (2 ページ), クイックスタート (2 ページ), クイック・スタート・マニュアル (2 ページ), クイックスタート (2 ページ), クイックスタート (2 ページ)

Crestron FlipTop FT2 Series クイック・スタート・マニュアル
FT2-700-ELEC-PTL
FlipTop™ FT2 Series Cable Management System, 700 Size, Electrical, Pass-Through Lid
Install the Locking Bars
To install the locking bars:
1. Position the locking bars so that the gasket and screws attached to
the locking bars engage the screw holes in the FT2 assembly.
2. Use a screwdriver to secure the locking bar screws to the FT2
assembly.
CAUTION:
Do not overtighten the locking bar screws.

Install the Bezel

Place the bezel onto the FT2 assembly so that the retractable lid fits
inside the bezel opening. The bezel is held in place using magnets.
Quick Start
10