- ページ 7

ヘッドセット Accutone USB400 VoIP COMMUNICATION HEADSETのPDF インストールマニュアル＆ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Accutone USB400 VoIP COMMUNICATION HEADSET 8 ページ。 Voip communication headset
Accutone USB400 VoIP COMMUNICATION HEADSET にも：インストールマニュアル＆ユーザーマニュアル (12 ページ)

ページを印刷する

operating the software

Enjoying the extra features of the software.

5 OPERATING THE SOFTWARE

The Effect tab controls the various sound effect you can use with your USB400 headset.

There are three panels here: Environment Type, Environment Size and Equalizer.

You can also choose from the 16 preset options for different types of music.

Under Karaoke tab, you can adjust

the microphone effect by selecting

the ON button, and checking the

Microphone Echo option.

Various Karaoke functions can be

set in this section, from adjusting

echo loudness to shifting key. You

can even remove the vocal sound

from any song using the Vocal

Cancellation option, so you can

have a music-only track.

These functions are applicable to all

audio programs.

There are 4 standard environment

types: bathroom, opera house,

underwater and music lounge.

Aside from these four, you can

choose from a drop-down menu

under More Option for 27 other

environment types.

Under environment size, there are

3 selection: small, medium to large

environment.

In the equalizer panel you can

adjust loudness of various

frequencies and save such settings.

verification and configuration

6 VERIFYING SUCCESSFUL INSTALLATION OF THE DRIVER

For all Windows operating systems mentioned earlier, to verify that the installation of

the USB driver is successful, you check within the Device Manager:

click on Start, Settings, and Control Panel.

in control panel, click on the System icon

open up the System Properties page

click on the Device Manager tab

(or Hardware tab and then Device Manager button for Windows XP)

in the Device Manager page, make sure that the View Device by Type is

selected.

(*An alternative way to check whether the USB controller is properly installed, make sure the

LED indicator is lit, and press mute to see if the color changes, if so, then the device is properly

installed, if not you should check the details settings as suggested below.)

Checking the drivers within the Device Manager

scroll down and find the Universal Serial Bus Controllers category

open it up and see if you can find the USB Composite Device

if yes close it and look for the Sound Video and Game Controllers category

open it up and find the USB Sound Device (or Accutone Audio adaptor)

if you see both these drivers installed, then the installation is successful

if you cannot locate them, try to unplug the USB controller, re-boot the machine, and

do the installation again or check the troubleshooting section in this manual.

7 CONFIGURING YOUR AUDIO DEVICE

For computers which come with an in-built sound card, your have a choice of using the

USB audio device or the original sound card for your multimedia applications. To

configure the currently selected audio device:

go to the Control Panel, click the Multimedia icon or Sounds and Multimedia

icon(for Windows Me, 2000 and XP)

select the Audio or Voice tabs, in either one of the pages you will see Preferred

Device selected for Sound Playback or Sound Recording to be Accutone USB

Audio Adaptor or USB Audio Adaptor

click the arrow within the selection and you will find your original sound card's name

and choose your preference

(**Remember to close all programs before you change this settings. Restart your audio applications

if the change is not effective.)

Accutone USB VoIP headset - Installation Guide & User Manual

Double-checking the installation of the driver.