- ページ 5

アンプ Accutone A10 ALPHAのPDF ユーザーマニュアル＆インストールマニュアルをオンラインで閲覧またはダウンロードできます。Accutone A10 ALPHA 10 ページ。 Telephone & multimedia amplifier

connection & preparations.

Hooking all the parts together!

To the computer headset:

This applies only to computer headset with separate microphone and

speaker plugs. Insert the Speaker Plug of the headset to the Jack on the

Front Panel with the "Speaker" sign (9) and the Microphone Plug to the

Jack with the "Microphone" sign (10).

A.2.4 Inserting Batteries

Replacing Batteries:

Slightly depress the compartment lid and slide it outwards. Install batteries

with polarities according to the battery diagram inside the compartment.

Close the lid and turn the power "ON". Two UM-3 (AA) batteries are

required. Alkaline batteries are recommended.

A.2

OPEN

part a. getting comfortable.

connection & preparations.

A.2

A.2.5 Configure the Control Unit

The 6-position Configuration Switch (2) at the back panel allows you to

select the proper setting so that the unit will work with your telephone base

unit. The control has 6 positions, which are (1 - 2 - 3 - 4 - 5 - 6). Wear the

headset over your head and switch the Handset/Headset Switch (11) to

the Headset position. Make sure to turn down the volume adjustment to

protect your ear. Check to see if the Telephone/Computer Switch (8) is

set to telephone position, if not, make sure it is. Now switch the 6-position

Configuration switch slowly until you can hear a clear dial tone.

If you receive a clear dial tone sound, then the receiving connection is

working. Note that there may be 2 matching settings, choose the clearer

setting or either one if both perform the same. There is at least one setting

which matches your telephone.

part a. getting comfortable.

Hooking all the parts together!

. . . . . .

1 2 3 4 5 6