- ページ 5
医療機器 Actron AutoScanner OBD II Scan Tool CP9575のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Actron AutoScanner OBD II Scan Tool CP9575 16 ページ。 Autoscanner obd ii scan tool
ページを印刷する
ERASE key
ENTER key
BACK key
OBD II Connector
Icons
The following icons may appear on the display:
# of #
Mod $##
Connect the Tool
To connect the Tool to the vehicle:
1. Locate the OBD II connector under the steering column.
If the connector is not there, a label should be there indicating
the whereabouts of the connector. For more information on OBD
II connectors, go to http://www.obdclearinghouse.com/oemdb.
2. If necessary, remove the cover from the vehicle connector.
3. Turn the ignition switch to the ON position. Do not start the
engine.
Performs the Erase Codes function and
scrolls forward through the screens. Press
this key when a down arrow () appears on
the display.
Selects displayed items.
Returns to the Main Menu or previous screen.
Connects the Tool to the vehicle connector.
Indicates additional information is available on next
screen by using the ERASE key.
Indicates additional information is available on pre-
vious screen by using the READ key.
Indicates a Pending DTC. For a definition of Pend-
ing DTC see page 6.
Appears only when viewing codes. Indicates code
sequence and quantity (code # of n). For example,
if you see 2 of 9 you are looking at the 2nd of 9
codes reported by the computer module.
Appears only when viewing codes. Indicates the
computer module that reported the code.
Indicates that the READ and ERASE hot keys
are active.
5