- ページ 14

電動工具 Digital Combo DK20SのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Digital Combo DK20S 20 ページ。 Multi-purpose press

The PRR menu item allows the user to define how sensitive the

height gauge is for displaying purposes. This setting defines how

quickly the pressure display will appear during normal operation.

The lower the sensitivity setting, the less the amount of change is

required when turning the pressure knob to cause the PRS display to

appear during the default operating mode. The higher the number, the

greater the amount of change in height is required to display the PRS

value.

Usually a setting of 02 is fine for normal operation. However,

sometimes merely closing the press can cause the pressure/height gauge

to register a reading and change the display to the PRS reading

undesirably. By increasing this value, the PRS display will not activate

from smaller changes to the pressure. Conversely, sometimes the

operator may adjust the pressure knob, but the PRS value does not

display unless the knob is turned very quickly. By lowering the value,

the display will activate based on smaller and slower changes to the

pressure setting.

Use the arrow keys to change the PRR

sensitivity setting. Press PRG to move to the

next menu item.

A temperature alarm is available for warning the user of out-of-

range temperature conditions. The user can set this menu item to

sound an alarm if the heat platen drops below the Set Point temperature

by the amount indicated. This can be helpful when pressing substrates

that absorb an unusually large amount of heat, causing the platen to

fall in temperature quickly. If the results of the transfer begin to

deteriorate, the Drop Sense feature can help the user avoid this.

Use the arrow keys to set the degrees or

to turn this feature off. If the Current

temperature drops below the Set Point by this

amount or more, an alarm will sound. The

default value is OFF.