- ページ 8

コントロールユニット DIGITAL DELAY Mega 60のPDF マニュアルをオンラインで閲覧またはダウンロードできます。DIGITAL DELAY Mega 60 9 ページ。 W/ 4 stage timer

Press the 4 key, to bring up the Starting Line Enhancer on the right side of the screen. If 1 thru 5 is displayed the

Starting Line Enhancer is turned on, if a 6 displayed, the Starting Line Enhancer will be turned off. To set the Starting Line

Enhancer mode, with arrows displayed on the right side of the screen, press the arrow keys until the desired number is

displayed. If the Starting Line Enhancer is turned on, the number shown to the right screen represents the mode the Starting

Line Enhancer is in.

To change whether the output on the terminal strip is putting out 12 volts or taking 12 volts away press the 5 key for

stage 1 timer, then press the zero key to change output. OFF on left screen, ON on right screen represents, 12 volts off going to

12 volts on, ON OFF represents the opposite. Most air throttles need 12 volts to close; most electric throttles need 12 volts to

stay open.

The Starting Line Enhancer will close the throttle under two different conditions. First if the Tap push-button is

pressed before a Transbrake pushbutton is pressed (in pushbutton modes 1 and 3 only), and second when the Transbrake Push-

Button is pressed the throttle will close.

Using mode 1 will release the SLE 8 tenths of a second before the transbrake releases.

Using mode 2 will release the SLE when the transbrake releases.

Using mode 3 will release the SLE when the transbrake push-button is released.

Using mode 4 will release the SLE when the transbrake push-button is engaged. (This is mainly used in pro light racing)

Using mode 5 will release the SLE one second before the transbrake releases.

Using mode 6 will turn off the SLE.

Explanation of the Starting Line Enhancer

This is to help the racer understand how the Starting Line Enhancer works. When turned on, the Starting Line

Enhancer will close the throttle, under two different conditions, first if the Tap push-button is pressed before a Transbrake

pushbutton is pressed (in pushbutton modes 1 and 3 only) and second when the Transbrake Push Button is pressed the throttle

will close. After the throttle has been closed the Starting Line Enhancer will open the throttle at the programmed amount of

time before the Transbrake solenoid is released.

Setting & Using the

Starting Line Enhancer

Crossover Delay = 01.35

Starting Line Enhancer = 00.40

Timer 1

= 1.000

Timer 2

= 2.000

Timer 3

= 08.00

Timer 4

= 00.50