- ページ 9

コントロールユニット DIGITAL DELAY REPLAY TACHのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DIGITAL DELAY REPLAY TACH 9 ページ。

Mounting the Replay Tach with RPM Switch

For complete viewing of the LCD, care should be taken when mounting the unit to make sure that the display is

angled towards the driver's eyes. Before mounting the Replay Tach with RPM Switch, place the box in the desired location

and check the legibility of the display in both day and night conditions. As shown below, the lower the box is placed below

eye level, the more the angle amount needs to increase for viewing.

Dash

Box

Connect to the Tach output of the Ignition box.

Connect one wire of button to +12 volts, the other wire here.

Connect to optional an standard automotive electric tach.

Connect to battery or steel ground, Not Aluminum.

Connect the shift solenoid here.

Use of a 15 Amp inline fuse is recommended

Connect to a switched +12 Volts.

Driver

Connect to Push-button

Dash

Box

Driver

Tach

Record

Tach Out

Ground

Shift

+12V