- ページ 4

トランシーバー BitRage CR45-A-58LのPDF インストールとセットアップマニュアルをオンラインで閲覧またはダウンロードできます。BitRage CR45-A-58L 12 ページ。

ページを印刷する

Product Description

Product Specifications

Wireless Digital

Transceiver

RF system

Operation

Operating Frequency

Data Interface

Data Modulation

Scheme

Connectors

Regulatory Compliance

Operating Temperature

Range

Power Requirement

Operating Range

Physical Dimensions

1–2

The CR45-A radio system provides full duplex data communication at full-

time 45 Mbps rate, operating in the UNII bands [range needed?]. Under

FCC rules, users are not required to be licensed to operate a system, as long

as the radio meets the maximum allowable EIRP limits.

CR45-A radio has been designed uniquely without a special modulation

scheme to provide clear channel. While this radio can manage the

transmission of the packet based DS-3 signal, its ability to manage the

constant stream of DS-3 signal allows the transportation of most complex

signals. Because the radio was designed without complex modulation

technology to meet the unlicensed spectrum, data is transported accurately

and efficiently.

To provide installation ease and minimal maintenance, antenna alignment is

the only required procedure. All other adjustments are done automatically.

5.8 GHz

Full-duplex

5.775 GHz TX and 5.301 GHz RX

5.301 GHz TX and 5.775 GHz RX

Baseband DS-3

none

75 ohm female BNC (Data In, Data Out)

Type N female (antenna)

4-pin twist lock (DC power)

FCC Part 15, Subpart E

-40C to +80C

15 VDC to 27 VDC @ 0.85 Amps

11 miles

7.50 in. wide, 8.5 in. high, 2 in. deep

(width includes mounting ears)

xxxx, Ver 0.01