- ページ 7
デスクトップ Digital Equipment MicroVAX 3100 Model 95のPDF インストレーション情報をオンラインで閲覧またはダウンロードできます。Digital Equipment MicroVAX 3100 Model 95 20 ページ。
ページを印刷するThis chapter shows you, step by step, how to install the MicroVAX 3100
Model 85/95/96.
Step 1: Choosing a Suitable Location
Follow these guidelines when you choose where to place the system unit:
•
Place the system unit where the room temperature is between 10°C and 40°C
(50°F and 104°F) and the humidity is between 10% and 90%.
•
Place the system unit at least 1 metre (3 feet) from heaters, photocopying
machines, or other operating equipment.
•
Place the system unit in a well-ventilated location.
•
Place the system unit on a work surface, which is raised above the floor.
•
Keep the air vents on either side of the system unit clear.
•
Do not place the system unit on its side.
•
Do not expose the system unit to direct sunlight or abrasive particles.
A console terminal is required for this installation, but is not supplied
with the system. You can order one from your Digital™ sales
representative.
Installation Procedure
Note
Installation Procedure 1–1
1