- ページ 4
スイッチ Bitstream HYPERION-105のPDF インストレーション＆クイックスタートマニュアルをオンラインで閲覧またはダウンロードできます。Bitstream HYPERION-105 6 ページ。
ページを印刷する
Quick start manual, a detailed manual is on the enclosed CD or www.bitstream.com.pl
1.4
The device has slots for SFP modules. The range and type of optical connector depends on the
type of SFP insert. SFP slots support 100Mbps, 1000Mbps and 2500Mbps.
Range and type of connector depends on the type of SFP insert.
SFP optical ports
Status signaling of
•
External LED – signals transmission link for 1Gbps
•
Internal LED – signals transmission link for 100Mbps
2
P
OWER SUPPLY
Two power inputs - redundant
–
Voltage range for version 77p 9-60V DC, and for PoE required 45-57V DC
–
Current consumption for version 77p 9V/ 800mA and 60V/ 140mA
–
Voltage polarity – the polarization on power connector is very important
–
Screw connection for power supply
–
3
POE POWER SUPPLY (A
Compliant with the IEEE802.3af standard, IEEE802.3at
–
Power available for each port up to 30W or 90W. (depending on the selected version)
–
For 55VDC power supply, the maximum total PoE power is 240W
–
4
F
IRST START
After connecting power supply with appropriate parameters to the inputs, the PWR LEDs should
light up green in the beginning. If only one of the power supply inputs is used, only one PWR diode
corresponding to this input will light up. The other LEDs indicate that the device is starting up and is
working properly. The device can be managed via any Ethernet port.
5
D
EFAULT PARAMETERS
IP parameters:
Adress: 192.168.0.10 Mask: 0.0.0.0
User: admin
6
M
ANAGEMENT
The device can be managed and monitored through a web interface using HTTP or HTTPS
protocol. Additionally, all management points can be accessed via the command line available via
SSH or Telnet protocol. The device is also equipped with an SNMP agent, which provides MIB
databases containing a lot of data about the current status of the device.
Note!!!: In the indicated models of switches, the firmware update from a version older than:
HYPERION-105 – v120
HYPERION-300 – v120
HYPERION-303 – v120
HYPERION-200 – v308
HYPERION-400 – v308
HYPERION-500 – v308
This will remove passwords for users existing in the configuration (including the "admin"
user).
REV.
1.14
Description of SFP optical ports
DDITIONAL OPTION
-
UP
Gate: 0.0.0.0
Password: no password
SHORT USER MANUAL HYPERION-105
)
2021.03.31
4/6