- ページ 3

サーバー Digital Equipment DECserver 900TMのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Digital Equipment DECserver 900TM 16 ページ。

Front Panel

LKG-8089-93I

DECserver 900TM

1) Power LED. Lights when the module has power.

2) Module OK LED. Lights when the module passes self-

test. Flashes when a non-fatal error occurs on self-test.

If the module fails self-test, the Module OK LED is off.

3) Network Traffic. Flashes or remains on depending on

network activity.

4) Network OK. Lights when the module has an active net-

work connection.

5) Seven-Segment Display. Provides error and status

information.

6) Flash RAM Slot. Provides an opening in which to insert

the Flash RAM card.

7) Reset Switch. Resets the module to factory defaults.

To reset: while turning on the power, press and hold the

reset switch until the Module OK LED flashes; or if the

DECserver 900TM is in operational mode (the seven

segment display shows the "race track" pattern), hold the

switch in for 5 seconds. The module reboots with factory

defaults.

8) Serial Port Connectors. Connect the asynchronous

devices to the DECserver 900TM. The serial port connec-

tors are labeled 1 to 32.