医療機器 Bittium MiniSnap Sensitive 1-CH ECG ElectrodeのPDF クイックマニュアルをオンラインで閲覧またはダウンロードできます。Bittium MiniSnap Sensitive 1-CH ECG Electrode 2 ページ。
ページを印刷する
Quick Guide - Bittium MiniSnap™ Sensitive 1-CH ECG Electrode
Bittium MiniSnap™ Sensitive
1-CH ECG Electrode
The Bittium MiniSnap™ Sensitive 1-CH ECG Electrode is intended to be
used with the Bittium Faros™ ECG device for the purpose of measuring
cardiac signals (ECG).
Equipment
Bittium
Faros™
Bittium
OmegaSnap™
Adapter
Caution!
› Place the electrode onto intact, clean
› Replace the electrode if it does not
skin only.
stick to the skin.
› Do not use body lotion or creams in
› Remove the electrode from the skin
the electrode area prior to applying the
after measuring.
electrode.
› Use the electrode only with the Bittium
› Do not use outdated electrodes. Please
Faros™ ECG device.
check the date on the packing material.
› The Faros device and OmegaSnap
› The electrode is for single use only.
adapter must be cleaned between
Reuse of the product may cause con-
users. The recommended cleaning
tamination, leading to infections.
method: non-alcoholic cleaning and
disinfection wipes for medical devices,
› Stop using the Faros ECG device
for example mikrozid® sensitive wipes
and remove the electrode from the
or SaniCloth AF3 wipes.
skin if the electrode causes adverse
reactions such as skin irritation or rash.
› Follow these instructions. See more
If any problems occur, please contact
detailed instructions in the Faros
your clinic or person responsible for
manual.
treatment.
Bittium
MiniSnap™
Sensitive
1-CH ECG
Electrode
Bittium Biosignals Oy
Pioneerinkatu 6
70800 Kuopio, FINLAND
Tel: +358 (0)40 3442000
Email: [email protected] or
www.bittium.com
Bittium
MiniSnap™ Sensitive
1-CH ECG Electrode
Quick Guide