- ページ 15

医療機器 AccuVein AV400のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AccuVein AV400 20 ページ。 A health professional’s guide for use and operation

Verify the charging cradle is properly connected (see the Set-

up section). Place the AV400 in the charging cradle with the

LCD facing outward to begin charging. While the AV400 is

in its charging cradle, the vein display light does not operate

and the device cannot be used. An animated battery charge

icon will display when the AV400 is charging. The light on the

charging cradle will only turn on when a device is detected. If

the light turns on when there is no device placed in the charg-

ing cradle please call AccuVein support for assistance.

To ensure the battery remains charged and ready for use,

store the AV400 in its charging cradle or a powered Accu-

Vein accessory.

CAUTION: Use only the AccuVein® PS310 power sup-

ply with the CC300 cradle and other AccuVein approved

accessories.

Charging, Cleaning and Troubleshooting

When the AV400 battery gets low the battery indicator will

flash yellow or red and beep repeatedly. Before the battery is

completely depleted, an alert requesting to charge the battery

will be displayed on the screen. The AV400 will resume nor-

mal operation once it has been charged.

In normal operation, the AV400 battery needs to be replaced

about every two years. Longer charge cycles or shorter operat-

ing periods are indications that the battery should be replaced.

To replace the battery, open the battery compartment on the

narrow end of the device's underside. Use a screwdriver or

edge of a small coin to unscrew the cover. Be careful not to

touch or scratch the lenses on the back of the device. Do NOT

use a tool to remove the battery.