- ページ 22

産業機器 Siemens SIMATIC ET 200ALのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Siemens SIMATIC ET 200AL 38 ページ。 10-link digital output module dq 8x24vdc/2a 8xm12
Siemens SIMATIC ET 200AL にも： マニュアル (50 ページ), マニュアル (38 ページ), マニュアル (32 ページ), マニュアル (37 ページ), 設備マニュアル (46 ページ), マニュアル (26 ページ), 設備マニュアル (28 ページ), 設備マニュアル (27 ページ), マニュアル (25 ページ)

ページを印刷する
Siemens SIMATIC ET 200AL マニュアル
Parameters/address space
4.2 Explanation of the parameters
IO-Link manual
The connected IO-Link device is not started automatically.
You must store the Vendor ID and Device ID of the connected IO-Link device in STEP 7.
In addition, you can select the inspection severity for data storage:
● Identical type (V1.0) without Backup&Restore
● Type-compatible (V1.1) without Backup&Restore
● Type-compatible (V1.1) with Backup&Restore
● Type-compatible (V1.1) with Restore
You can find the Vendor ID and Device ID on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/109748852).
DI
The port is operating as a standard digital input.
DQ
The port is operating as a standard digital output.
Disabled
The port is disabled.
Configuration options of the communication module CM 4xIO-Link 4xM12
The CM 4xIO-Link 4xM12 communication module supports a variable address space for
I/O data.
The following table provides an overview of the configuration options for the supported
address spaces for I/O data:
Module configuration/
supporting address space for I/O data
1 byte input/1 byte output
2 bytes inputs/2 bytes outputs
4 bytes inputs/4 bytes outputs
8 bytes inputs/0 bytes outputs
8 bytes inputs/8 bytes outputs
12 bytes inputs/8 bytes outputs
16 bytes inputs/16 bytes outputs
20 bytes inputs/16 bytes outputs
32 bytes inputs/32 bytes outputs
* No Port Qualifier Information is transferred with this configuration.
22
IO-Link Master with
Firmware V1.0
X
X
X
X
X
X
Communication module CM 4xIO-Link 4xM12(6ES7147-5JD00-0BA0)
IO-Link Master with
Firmware V1.1
X*
X
X
X
X
X
X
Manual, 10/2017, A5E32352322-AE