- ページ 14

産業機器 Siemens Simatic S7-1500のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Siemens Simatic S7-1500 41 ページ。 Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Siemens Simatic S7-1500 にも: マニュアル (40 ページ), マニュアル (37 ページ), マニュアル (47 ページ), マニュアル (24 ページ), マニュアル (34 ページ), ユーザーマニュアル (45 ページ), マニュアル (27 ページ), 設定マニュアル (20 ページ), マニュアル (47 ページ), マニュアル (43 ページ), マニュアル (48 ページ), マニュアル (26 ページ), マニュアル (28 ページ), マニュアル (50 ページ), マニュアル (34 ページ), ユーザーマニュアル (44 ページ), マニュアル (50 ページ), マニュアル (30 ページ), マニュアル (50 ページ), マニュアル (40 ページ), セーフティ・プログラミング (48 ページ), 通信取扱説明書 (36 ページ), マニュアル (40 ページ), マニュアル (25 ページ), マニュアル (42 ページ), アプリケーション概要 (50 ページ), マニュアル (28 ページ), マニュアル (33 ページ), マニュアル (49 ページ), マニュアル (36 ページ), マニュアル (41 ページ), マニュアル (46 ページ), マニュアル (38 ページ), マニュアル (35 ページ), マニュアル (39 ページ), マニュアル (28 ページ), マニュアル (35 ページ), 設備マニュアル (35 ページ), マニュアル (50 ページ), 設備マニュアル (32 ページ), 設備マニュアル (38 ページ), マニュアル (29 ページ), 設備マニュアル (38 ページ), マニュアル (34 ページ), マニュアル (36 ページ), 設備マニュアル (50 ページ), マニュアル (45 ページ)

Siemens Simatic S7-1500 マニュアル

Parameters/address space

4.1

Parameters

DQ 16x24...48VUC/125VDC/0.5A ST parameters
When you assign the module parameters in STEP 7, you use various parameters to specify
the module properties. The following table lists the configurable parameters. The effective
range of the configurable parameters depends on the type of configuration. The following
configurations are possible:
● Central operation with a S7-1500 CPU
● Distributed operation on PROFINET IO in an ET 200MP system
● Distributed operation on PROFIBUS DP in an ET 200MP system
For parameter assignment in the user program, the parameters are transferred to the
module using the WRREC instruction (parameter assignment in RUN) and data records; see
chapter Parameter assignment and structure of the parameter data records (Page 28).
Table 4- 1
Configurable parameters and their defaults
Parameters
Reaction to CPU STOP
4.2

Description of parameters

Reaction to CPU STOP
Determines the reaction of the output when the CPU goes into the STOP state or when the
connection to the CPU is interrupted.
14
Range of values
Default setting
Turn off
Turn off
Keep last
value
Output sub-
stitute val-
ue 1
Digital output module DQ 16x24...48VUC/125VDC/0.5A ST (6ES7522-5EH00-0AB0)
Parameter as-
Scope with configuration soft-
signment in RUN
ware, e.g., STEP 7 (TIA Portal)
Integrated in
the hardware
catalog as of
STEP 7, V13
SP1 or GSD
file PROFINET
IO
Yes
Channel
Manual, 11/2015, A5E35683139-AA
4
GSD file
PROFIBUS DP
Channel