- ページ 48

産業機器 Siemens SIMATIC S7-200のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Siemens SIMATIC S7-200 49 ページ。 Ethernet gateway for simatic mpi/ profibus driver
Siemens SIMATIC S7-200 にも：マニュアル (30 ページ), マニュアル (35 ページ), ドライバーマニュアル (28 ページ), マニュアル (18 ページ), システムマニュアル (20 ページ)

ページを印刷する

Appendix

A.2 Address areas of the S7-200

A.2

Address areas of the S7-200

The diagram below shows the memory addresses of the S7-200 PLC where inputs and

outputs are mapped. For example, if a voltage is applied to a physical input, this "1" signal is

mapped at an address in the memory that is assigned to this input. The memory areas which

form the interface with the screw terminals (inputs and outputs) of the PLC are called the

"process image of the inputs" (PII) and the "process image of the outputs" (PIO). These

memory areas contain an image of the signals from your control process.

Getting Started - Beginners

Training Documents, 07/2007, A5E01031470B