- ページ 14

産業機器 Siemens Simatic S7-300のPDF はじめにをオンラインで閲覧またはダウンロードできます。Siemens Simatic S7-300 32 ページ。 Automation systems, controlling a physical axis
Siemens Simatic S7-300 にも： ユーザーマニュアル (34 ページ), マニュアル (21 ページ), 操作説明 (4 ページ), 操作説明 (5 ページ), マニュアル (35 ページ), はじめに (8 ページ), はじめに (16 ページ), アプリケーション概要 (24 ページ), マニュアル (18 ページ), マニュアル (32 ページ), インストールおよびハードウェアマニュアル (20 ページ)

ページを印刷する
Siemens Simatic S7-300 はじめに
Learning units

3.3 2. Step: Configuring the CPU 317T-2 DP in HW -Config

3.3
2. Step: Configuring the CPU 317T-2 DP in HW -Config
Procedure
Step
Activity
1
Set up a new project in the SIMATIC Manager (e.g. "Getting Started
CPU 317T")
Select the Insert > Station > SIMATIC 300 Station menu command to
insert a SIMATIC 300 station.
2
Open HW Config by selecting the "SIMATIC 300" station and double-
clicking "Hardware".
3
To open the hardware catalog, select View > Catalog.
In the "Profile" drop-down list, select the hardware profile "SIMATIC Technology CPU".
4
Use drag-and-drop to insert a mounting rail via "Rack 300" in the
station window of the HW Config.
5
Via "PS 300" drag-and-drop the "PS 307 10A" power supply module
onto the mounting rail.
6
Use drag-and-drop to add the Technology CPU to the mounting rail.
7
You change the transmission rate in the next step.
Confirm the message box with "OK."
8
Confirm the default settings of the PROFIBUS configuration with
"OK".
14
Result
The SIMATIC 300 station appears
in SIMATIC Manager.
HW Config opens.
This creates a mounting rail.
The power supply module appears
on the mounting rail.
A message box appears.
In the next dialog box, you can set
the PROFIBUS properties at
DP(DRIVE).
CPU 317T-2 DP: Controlling a physical axis
Getting Started, 03/2008, A5E00251786-05