- ページ 11

産業機器 Siemens Simatic S7-400のPDF はじめにをオンラインで閲覧またはダウンロードできます。Siemens Simatic S7-400 36 ページ。 Block library motor starter sirius for simatic pcs 7 sirius motor starter pcs 7 library v7.1+sp2 / sirius motor starter pcs 7 library v8 migration 8.0+sp1
Siemens Simatic S7-400 にも：マニュアル (35 ページ), マニュアル (18 ページ)

ページを印刷する

1. Table of Contents

First steps for the project

2.1

Configuration of PC station

S7 automation station or S7-PLCSIM - Requirement

To be able to use the S7 automation station or S7-PLCSIM, you must set up a PROFIBUS

interface for the SIMATIC PC station. This can be used to compile OS tags and establish the

connection between the AS and the OS.

Note

Use of S7-PLCSIM - Requirement

If S7-PLCSIM is used for a simulation instead of an S7-CPU, the S7-PLCSIM software must

be installed.

Requirements for SIMATIC PCS 7, V7.0

● SIMATIC PCS 7 V7.0 or higher must be installed and the license keys available.

● The PCS 7 Block Library for SIRIUS Motor Starter package for PCS 7 V7.0 must be

installed.

● The PCS 7 project must have been created.

Requirements for SIMATIC PCS 7, V7.1

● SIMATIC PCS 7 V7.1 or higher must be installed and the license keys available.

● The PCS 7 Block Library for SIRIUS Motor Starter package for PCS 7 V7.1 must be

installed.

● The PCS 7 project must have been created.

SIRIUS Motor Starter PCS 7 Library "V7.1+SP2"/ "V8 Migration V8.0+SP1"

Getting Started, 08/2013, A5E02897539020A/RS-AA/005