- ページ 19

産業機器 Siemens SIMOGEAR BA 2039のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens SIMOGEAR BA 2039 40 ページ。 Adapter for gearbox

Correct

Image 3-2

Procedure

1. Use either benzine or solvent to remove the anti-corrosion protection from the shaft ends

and flanges or remove the applied protective skin.

2. Fit the drive input and output elements to the shafts. Fasten the elements when

necessary.

You have now fitted the input or output element.

3.5

Mounting the motor

NOTICE

Moisture penetrates an inadequately sealed geared motor

If the geared motor is to be installed outdoors or for an installation requiring a high degree

of protection (≥ IP55):

• Seal the flange, bolts 1505 or integrated elements such as proximity switches, using an

• The flange-mounted motor must be sealed across the entire contact surface.

• Seal the geared motor in the outer area.

BA 2039

Operating Instructions, 04/2016, A5E37431501A/RS-AC

Hub

Force

Mounting arrangement for low stress on shafts and bearings

appropriate sealing compound.

Incorrect

Installing

3.5 Mounting the motor