- ページ 22

産業機器 Siemens SIMOGEAR BA 2039のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens SIMOGEAR BA 2039 40 ページ。 Adapter for gearbox

Installing

3.5 Mounting the motor

3.5.2

Mount the standard motor to the K4 or K5 short adapter

Note

Ensure that the plastic ring

The plastic ring

①

②

1505 Bolt

Image 3-4

Procedure

1. Check the correct position of the plastic ring

required.

2. Align the position of the motor shaft so that you can insert it in the shaft

not need to be greased.

3. Apply adhesive (medium strength, e.g. Loctite 243) to the bolts 1505.

4. Fasten the motor with the bolts 1505 with the prescribed torque. See Thread sizes and

tightening torques for fastening bolts (Page 17).

You have mounted the standard motor on the K4 or K5 adapter.

ATEX version gearboxes

Impacts can cause sparks.

Apply adhesive (medium strength, e.g. Loctite 243) to the bolts 1505.

①

prevents fretting rust. It does not need to be greased.

Plastic ring

Shaft

Plastic ring for K4 and K5

is located in the correct position.

①

in the shaft. Correct the position if

Operating Instructions, 04/2016, A5E37431501A/RS-AC

Correct

Incorrect

②

. The shafts do

BA 2039