- ページ 15

産業機器 Siemens SIMOGEAR BA 2730のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens SIMOGEAR BA 2730 28 ページ。 Geared motor with encoder for safety-relevant applications
Siemens SIMOGEAR BA 2730 にも：取扱説明書 (30 ページ)

ページを印刷する

2.3

Electrical installation of the encoder

Inadequately qualified personnel

If the encoder is electrically installed by inadequately qualified personnel then the functional

safety can be disabled.

Only qualified personnel are authorized to carry out the work.

These persons must be knowledgeable about:

• Topics relating to functional safety

• Legislation, safety regulations and standards for functional safety

• Content of the detailed operating instructions provided

Premature damage or destruction of the encoder

Electrostatic discharge can cause the encoder to fail.

Do not touch the connector pins.

Do not exceed the following tolerances regarding the motor supply voltage according to

EN60034-1 Range A.

● Voltage ±5 %

● Frequency ±2 %

Especially observe the following topics in the operating instructions Sendix SIL Encoders for

Functional Safety from the Kübler company:

● Functional safety

● Electrical installation, EMC and general notes

● Data transfer to encoder evaluation

Incorrect connection assignment of the encoder

The connection assignment in the operating instructions Sendix SIL Encoders for

Functional Safety from the Kübler company is not applicable for the SIMOGEAR geared

motor with encoder.

The valid connection assignment is coordinated with the geared motor.

Refer to these operating instructions for the connection assignment of the SIMOGEAR

geared motor with encoder.

BA 2730

Operating Instructions, 08/2015, A5E36448105

WARNING

Securing functional safety

2.3 Electrical installation of the encoder