- ページ 19
プリンター Epson XP-600のPDF クイックマニュアルをオンラインで閲覧またはダウンロードできます。Epson XP-600 40 ページ。 Xp-600 impresora small-in-one
Epson XP-600 にも： スタートアップマニュアル (4 ページ), マニュアル (46 ページ), ここからスタート (4 ページ), 製品仕様 (2 ページ), 基本マニュアル (24 ページ), (インストレーションガイド (4 ページ)
ページを印刷する
Maintaining Your Product
Follow the instructions in this chapter to check and clean the print head nozzles, check ink
levels, and replace ink cartridges. If you need to align the print head, see the online User's
Guide.
Caution: To keep your product looking like new, don't place anything on top of the
cover or use it as a writing surface. If you need to clean the cover, use only a soft,
non-abrasive microfiber-type cloth.
Checking the Print Head Nozzles
If your printouts are faint or have gaps in them, some of the nozzles in the print head may
be clogged or ink may be running low in one or more of the ink cartridges. Follow the
steps below to check the print head nozzles.
1.
Load a few sheets of plain paper in the lower paper cassette (cassette 2).
2.
Press
if necessary, press l or r to select
3.
Press u or d to select
again.
4.
Press x. The nozzle check is printed.
5.
Check the printed pattern to see if there are gaps in the lines:
Nozzles
are clean
Nozzles need
cleaning
6.
If there are no gaps, the print head is clean. Select
If there are gaps or the pattern is faint, press u or d to select
then press
OK.
page 20).
Maintenance
Then follow the instructions on the screen to clean the print head (see
, then press
Setup
, press
, select
OK
Nozzle Check
, then press
Done
.
OK
, then press
.
OK
Clean the print head
Maintaining Your Product
OK
,
19