- ページ 35
産業機器 Siemens SINUMERIK 808DのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Siemens SINUMERIK 808D 48 ページ。 Connecting with v60 driver
Siemens SINUMERIK 808D にも： 取扱説明書 (34 ページ), サービスマニュアル (46 ページ), 使用方法 (2 ページ), インストレーション・マニュアル (48 ページ)
ページを印刷する
Remedy
+
4.1.9
Alarm 700030
Alarm description
It is not a fault but a reminder that the time is up for the first service plan preset on the control system. You need to execute
the service plan immediately.
PLC information
PLC address: DB1600.DBX3.6
Subroutine: PI_SERVICE (SBR 46)
Remedy
1.
+
2.
3.
4.
4.1.10
Alarm 700060
Alarm description
It is not possible to change the program test state on the control system during program execution. You must first place the
control system to the reset state.
PLC information
PLC address: DB1600.DBX7.4
Subroutine: MCP_NCK (SBR 37)
Service Manual
01/2017
1.
Check the preset service maintenance plan and make the relevant preparations.
2.
Select the system data operating area.
3.
Press this key on the PPU to access the extended softkeys.
4.
Enter the main screen of service planning.
5.
Press this softkey on the PPU to cancel the alarm.
Select the system data operating area.
Press this key on the PPU to access the extended softkeys.
Enter the main screen of service planning.
Press this softkey on the PPU after executing the relevant service plan to cancel the alarm.
35