- ページ 21
産業機器 Siemens SINUMERIK 808DのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Siemens SINUMERIK 808D 48 ページ。 Connecting with v60 driver
Siemens SINUMERIK 808D にも： 取扱説明書 (34 ページ), サービスマニュアル (46 ページ), サービスマニュアル (48 ページ), 使用方法 (2 ページ)
ページを印刷する
Connecting
End sleeves are necessary if you use two cables per connection.
Fasten the cables to the screw terminals and plug the terminals into interfaces X100, X101
and X102 correctly.
3.3.2
Digital output interfaces - X200, X201
Type
Cable
Outputs
Table 3- 4
Illustration
Electrical Installation Manual
Operating Instructions, 12/2014, 6FC5397-2EP10-0BA0
Mini Combicon 10-pin
Max. length: 10 m
Max. cross-section:
One cable per connection: ≥ 0.5 mm2
Rated digital output current: 250 mA
Pin assignment of X200 (DOUT0)
Pin
Signal
1
+24V
2
Q0.0
3
Q0.1
4
Q0.2
5
Q0.3
6
Q0.4
7
Q0.5
8
Q0.6
9
Q0.7
10
M
Note:
The +24 V power supply must be connected even if X200 is not used;
otherwise, the communication between the PPU and the drives does not
function as it should.
3.3 Connecting the interfaces on the PPU
Comment
+24V input (20.4 - 28.8 V); must be connected
Digital output
Digital output
Digital output
Digital output
Digital output
Digital output
Digital output
Digital output
External ground; must be connected
Connecting
21