- ページ 18

産業機器 Siemens SINUMERIK 840D slのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens SINUMERIK 840D sl 33 ページ。 Operator panel front: op 010s
Siemens SINUMERIK 840D sl にも：アップグレード手順 (4 ページ), アップグレード手順 (5 ページ), コミッショニング・マニュアル (36 ページ), アップグレード手順 (3 ページ), アップグレード手順 (3 ページ), システムマニュアル (44 ページ), 設備マニュアル (28 ページ), 設備マニュアル (48 ページ), 設備マニュアル (26 ページ), 設備マニュアル (28 ページ)

Overview of the program data

2.5 Configuring filters

2.5.3

Save filter

You can save any individually set filter.

Save filter

Display

Filter name

Comment

Application

Procedure

Description

Any filter name with a maximum 40 characters.

Freely selectable text as a comment to a filter setting.

See Chapter: Entering a comment (Page 24) Enter comment

Global

Filter can be used in the entire DNC system.

Local

A filter can only be used on the machine for which it was

originally created.

User defined

A filter can only be used by the user who created it.

You have selected the filter criteria and wish to save these settings.

Press the "Save filter" softkey.

The "Save filter" window is opened.

Enter the filter name into the entry field "Filter name".

You obtain a confirmation prompt if you use an existing name.

Confirm the query in order to overwrite the name.

- OR -

Cancel the action in order to change the name.

Enter the new name and optionally a comment in the entry field.

Press the "OK" softkey to save the filter.

- OR -

Press the "Cancel" softkey to reject the settings.

MCIS DNC - Direct Numerical Control

Operating Manual, 09/2011, 6FC5398-7DP20-1BA0