- ページ 23
産業機器 Siemens SIREMOBIL Compact LのPDF 設置・設定マニュアルをオンラインで閲覧またはダウンロードできます。Siemens SIREMOBIL Compact L 28 ページ。
Siemens SIREMOBIL Compact L にも： 取り付けとセッティングの説明 (4 ページ), 取扱説明書 (21 ページ), 取付説明書 (6 ページ)
ページを印刷する
Installing the lifting column
Installing the switch-mode power supply M 14
•
Install the base plate.
•
Install the switched-mode power supply with the plug-in connections downwards.
•
Plug in the connections.
•
Screw the protective conductor onto the base plate of the line filter and place the contact
washer under the cable lug.
Installing the stabilization bracket
•
Fasten the stabilization bracket of the monitor cable plug again.
•
Fasten the protective conductor on the unit floor and on the chassis, and place the
contact washers under the cable lugs.
Installing the boards D1 and D2
•
Fasten the heat sink on the lifting column operating side (Fig. 13).
•
Fasten 6 spacer screws on the heat sink (Fig. 13).
•
Apply heat conduction paste on the contact surface for the the heat sink.
•
Fit the board D2 on the spacer screws and fasten it to the heat sink (Fig. 13).
•
Plug in the connectors on D2 board.
•
Fasten the D2 board with the spacers (Fig. 13).
•
Plug the intermediate plate back on.
•
Fit the spacer tubes on the 6 screws.
Siemens AG
Medical Solutions
n.a.
SPR2-130.841.02
Rev. 01
Page 7 of 10
07.05
CS PS 24
3 - 7
3
3
3
SIREMOBIL Compact L
System Manual