- ページ 17

産業機器 Siemens SITRANS LのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens SITRANS L 38 ページ。 Ultrasonic transmitters
Siemens SITRANS L にも：応用例 (11 ページ)

• Under certain extreme circumstances, the non-metallic parts incorporated in the enclosure

of this equipment may generate an ignition-capable level of electrostatic charge.

Therefore the equipment shall not be installed in a location where the external conditions

are conducive to the build-up of electrostatic charge on such surfaces.

• In addition, the equipment shall only be cleaned with a damp cloth. This is particularly

important if the equipment is installed in a zone 0 location.

4.3

Nameplates for hazardous area installations

Note

Device-specific approvals

Always refer to nameplates on the device for device-specific approvals.

ATEX and UKEX certificates on nameplate

The ATEX and UKEX certificates listed on the nameplate can be downloaded from the LU180

product page on our website http:wwww.siemens.com/SITRANSLU180.

Go to Support > Approvals > Certificates.

The IECEX certificate listed on the nameplate can be viewed on the IECEx website:

1. Go to http://iecex.iec.ch/

2. Click on Certified Equipment

3. Enter the certificate number IECEx 15.0118X

SITRANS LU180

Operating Instructions, 09/2021, A5E37100674-AB

4.3 Nameplates for hazardous area installations

Connecting