- ページ 29

産業機器 Siemens SITRANS WW310のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens SITRANS WW310 48 ページ。 Weighfeeders

4. Observe the results of the adjustment and then readjust, if necessary.

Steps 2 and 3 may need to be repeated to obtain perfect belt tracking.

Note

As you extend or compress the telescoper, you may be changing the belt tension. If belt

tension has increased (or decreased) considerably while attempting to track the belt, then

compress (or extend) both telescopers and complete the belt tracking process again. To

avoid this problem, extend one telescoper while compressing the other to obtain proper

belt tracking.

5. Re-tighten the jam nut located on the telescoper to maintain the new telescoper position after

completing the tracking procedure.

6. If you are having problems tracking the belt, consult your Siemens representative. Common

causes of belt tracking problems are: uneven or improperly distributed product loading,

twisted frame, or product build-up on head or tail pulleys.

①

②

SITRANS WW310

Operating Instructions, 03/2014, A5E33490433-AA

Side rail

Adjusting screw

8.6 Telescoper adjustment

③

Jam nut

④

Driven shaft

Start Up