- ページ 2
産業機器 Siemens SWT-3000のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Siemens SWT-3000 2 ページ。
ページを印刷する
• Connecting the Service PC
A service PC and the service program PowerSys are needed for startup, maintenance,
and diagnostic purpose of the SWT 3000 units. The service PC is connected to the USB
socket on the front panel of the PU4 module with a USB A/B plug cable.
• The service program PowerSys and the communication to the device via the serial
interface from the service PC or via a TCP/IP connection (default IP address
192.168.20.200) is described in the device manual.
• The corresponding software package (formerly delivered on
DVD) is available for download on SIOS (Siemens Industry
Online Support) platform free of charge, a registration is
required.
Product Support/Energy/Energy automation and smart
grid/Smart communication/Download
• Test protocols are available for download under
https://www.ea-testreports.siemens.com
Enter BF code of device to view the requested test protocol in
pdf format. The installed software package version loaded into
the device can be seen in the protocol.
Interfaces and modules
1)
IFC-1 in slot 1 for interface module IFC-x (optional)
2)
IFC-2 in slot 2 for interface module IFC-x (optional)
3)
IFC-3 in slot 3 for interface module IFC-x (optional)
4)
IFC-4 in slot 4 for interface module IFC-x (optional)
5)
Ethernet EN100 module for IEC 61850/TPoP (optional)
6)
Processing unit module (PU4)
7)
Digital line equipment module (DLE) (optional, if digital data transmission is
desired)
8)
Slot for the redundant power supply module (PS-2) (optional)
9)
Power supply module (PS-1)
10)
Alarm module (ALR)
11)
Fiber-optic module (FOM-2) (optional, if digital or analog data transmission is
desired)
12)
Copper line equipment module (CLE) or optionally fiber-optic module (FOM-1)
(optional, if digital or analog data transmission is desired)
13)
RJ45 socket for PU4 Ethernet interface
14)
USB socket (type B)
15)
RJ45 sockets for electrical EN100 Ethernet interface (IEC 61850/TPoP)
SFP sockets if optical EN100 Ethernet interface (IEC 61850/TPoP) are used
Backplane
1)
Power supply (redundant)
2)
Main power supply
3)
ALR
4)
CLE
5)
SSB (Remote monitoring interface connector)
6)
Connector for DSUB adapter with LID1 and LID 2
7)
IFC-4
8)
IFC-3
9)
IFC-2
10)
IFC-1
11)
SSR (Console for PU4)
12)
SC (Service channel interface SWT 3000)
Smart Communications, SWT 3000 Product Information
C53000-X6040-C605-3 Edition Sept. 2021
Functions/Features
• Bidirectional and independent transmission of commands
• Up to 16 commands with digital line interfaces
• Up to 4 commands with analog line interfaces or PLC
• Command Interface for normal contact load (IFC-P, fast)
4 inputs and 4 relay outputs (max. 4 modules)
• Command Interface module for high contact load (IFC-D)
4 inputs and 4 relay outputs (max. 4 modules)
• Interface module for binary command signaling (IFC-S)
8 relay outputs (max. 2 modules)
• Command interface module IEC 61850 electr. or optical
• Line Interface modules
- 2x X.21, 2x G703.1, 2x G703.6 (DLE)
- 2x fiber, short range SM (FOS1), short range MM (FOS2), long range (FOL1)
or C37.94 (FOS3)
- 1x Analog 2 or 4 wire (CLE)
- 1x Ethernet electrical or optical (TPoP)
• Interface module for alarm signaling (ALR
- 3 relay outputs, 1 input for time synchronization
• Configuration via element manager application
- USB and ETH interface
• Command Input configuration
- voltage range (24 – 250 V DC)
- pulse suppression
- input command limitation and extension
• Command Output configuration
- output or signaling allocation
- input command limitation and extension
• Power Supply
- 2 wide range supplies (DC, AC/DC)
- redundant assembly
• Event recorder and command counter
• Path protection via 2 different line interfaces in any combination
• Network management SNMP interface
Technical Data
Power Supply
Input voltage
DC 24 V to 60 V (-20 % / +20 %) or
DC 110 V/220 V/250 V (-20 % / +20 %) or
AC 115 V/230 V (-20 % to +10 %) 47 Hz to 63 Hz
Power consumption
Approx. 30 W/VA
Cable cross-section
Max. 2.5 mm
Climatic Conditions IEC 60721-3
During operation
-5° C to + 55° C
During storage and transport
-40° C to +70° C
Relative humidity
5 % to 95 %
Absolute humidity
29 g/m3 no condensation
Mechanical Design
19" frame
Dimensions
Height: 132 mm/3U
Width: 482.6 mm/19 inch
Depth: 240 mm
Weight
Approx. 5 kg
Color
White aluminum, RAL 9006
Degree of protection
IP20
SWT 3000
2
2