- ページ 28

産業機器 Siemens VersiCharge 8EM1310 SeriesのPDF 接続マニュアルをオンラインで閲覧またはダウンロードできます。Siemens VersiCharge 8EM1310 Series 31 ページ。 Ac wallbox iec version

Feasibility

6.1

The local WiFi signal must have sufficient strength to connect to the Wallbox. If the WiFi

signal is lower than -60 dBm, connection via WiFi is not recommended. The WiFi signal

strength can be measured on a smartphone using various apps (iOS: Airport

analyzer) or using a laptop with a corresponding program (e.g.: WirelessNetView). If this is

not the case, the WiFi signal can be boosted using a WiFi repeater.

For the connection via WiFi, the desired network is selected and the correct password is

entered using the app and registered in Siemens Device Management.

Note

Enable WiFi search in the settings of the app

6.2

If the WiFi signal is insufficient, VersiCharge can be connected to the Internet via a LAN cable

as an alternative. In this case, in addition to the security policies of the network, it must be

considered whether the maximum length of 328 ft (100 meters) for an Ethernet connection

is exceeded on site.

You can find the details on the connection and the available ports in the operating

instructions (see SIOS (https://support.industry.siemens.com/cs/de/en/view/109782228)).

If it is not possible to connect via Ethernet or WiFi due to the conditions on site, parent

devices have the option of connecting via mobile wireless.

Note

Ensure that the Ethernet cable is already connected to the LAN and that an open internet

connection exists before you start the device.

VersiCharge Connectivity Guide

Getting Started, 12/2021, A5E51237456-AA

, Android: WiFi