- ページ 15

コントローラー Siemens 125-1957のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Siemens 125-1957 48 ページ。 Apogee unit vent controller ⎯ 0 to 10v output

Mixed Air/Discharge Air Temperature Sensor

The mixed air/discharge air temperature sensor is a 100K ohm thermistor that connects to

the controller at the screw terminals for Al 3.

For more information about Siemens Building Technologies, Inc. temperature sensors,

contact your local Siemens Building Technologies, Inc. representative.

Actuators

Damper Actuators

The damper actuator used with the Unit Vent Controller—0 to 10V Output is a 0 to 10V spring

return electronic damper motor that positions an outside air damper. A 0 to 10V electronic

damper motor can be used to position a face-and-bypass damper.

Valve Actuators

The valve actuators used with the Unit Vent Controller—0 to 10V Output are modulating

spring return and non-spring return electronic valve motors that position the valves.

•

Relay Module

•

Damper Actuator(s)

•

Valve Actuator(s)

•

Mixed Air/Discharge Air Temperature Sensor (optional)

•

TEC Room Temperature Sensor

Contact your local Siemens Building Technologies, Inc. representative for product numbers

and more information.

Siemens Building Technologies, Inc.

Introduction