- ページ 12

コントローラー Siemens 125-5033のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Siemens 125-5033 35 ページ。 Two-state constant volume fume hood controller

Fume Hood Controller Owner's Manual

24V COMMON

24V HOT

GROUND

Figure 2. Power Wiring.

Controller LED Indicators

The controller has six Light Emitting Diode (LED) indicators. See Table 2.

LED Type

Transmit

Receive

BST

"Basic Sanity Test"

The Operator Display Panel (ODP) is the interface device between the Fume Hood Controller

and the operator. Its main functions are to display normal, warning, and alarm conditions to

the operator. The ODP consists of a housing, three Light Emitting Diodes (LEDs), a liquid

crystal display (LCD), four buttons, and a portable operator's terminal port. See Figure 4. The

ODP buttons function as follows:

Horn Silence button – Pressing the Horn Silence button turns the audible alarm off for the

current alarm event.

Emergency Purge button – Pressing the Emergency Purge button removes contaminated

air from the fume hood by switching to an emergency exhaust flow level. The internal audible

alarm will sound. Emergency Purge automatically overrides any other control mode in the

Fume Hood Controller.

Table 2. Controller LEDs.

Label

(if present)*

LED 1 - LED 3

Indicates the ON/OFF status of the DO associated with it. A

glowing LED indicates that the DO is energized.

Indicates, when flashing, that the controller is transmitting

information to the field panel.

Indicates, when flashing, that the controller is receiving

information from the field panel.

BST

Indicates, when flashing ON and OFF once per second, that

the controller is functioning properly.

FLN TRUNK

+ -

(SHIELD)

(-)

(+)

Figure 3. Communication Wiring.

Indication

Siemens Building Technologies, Inc.

(SHIELD)