- ページ 4

コントローラー Siemens 25のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Siemens 25 12 ページ。 Combination starters
Siemens 25 にも：交換部品と取扱説明書 (6 ページ), トラブルシューティングマニュアル (39 ページ)

8 Maintenance Instructions

8.1

All parts, modules of this product must be tested, inspected, for performance and

safety aspects every 12 months to ensure that the product functions properly and is

safe for patients, operating personnal and other persons.

Every 12 months, trained technical personnel should inspect and if necessary replace

system components of the generator which may produce hazardous conditions due to

excessive wear and tear. These instructions should be included in the annual

maintenance performed by Siemens Customer Service.

If more frequent inspections and maintenance are required by federal or local

regulations, ensure compliance with them.

8.2

Before working on the open MULTIMOBIL 2.5 switch off the unit with the power switch

on the control panel and unplug the power cable.

Before inserting or removing PC boards, observe the ESD regulations.

Damaged or missing screws should only be replaced by steel screws having the

specified tensile strength with Nickel Plating (6492) specified in the Surface Finish

Documents.

8.3

The unit must always be switched OFF or disconnected before cleaning.

Use only water or a luke warm mixture of a household cleaner diluted with water to

clean the unit .

Do not use an abrasive or organic solvents or cleaning agents containing solvents

such as gasoline used for cleaning purposes, alcohol or stain remover . Do not spray

water on the unit.

CAUTION

Clean the unit with a damp cloth or cotton pad.

Dampen the cloth or pad with water or lukewarm, diluted commercially available liquid

cleaning solution.

Siemens Ltd. Med India

Switch OFF the system prior to cleaning,disinfecting, or

sterilizing

Version 6.0

Service Manual

Maintenance Instructions

8-3