- ページ 28

モニター Samsung 400FPn-2 - SyncMaster - 40" LCD Flat Panel DisplayのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Samsung 400FPn-2 - SyncMaster - 40" LCD Flat Panel Display 39 ページ。 Quick guide (korean)
Samsung 400FPn-2 - SyncMaster - 40" LCD Flat Panel Display にも：クイック・スタート・マニュアル (29 ページ), 仕様 (2 ページ), (クイック・スタート・ガイド (39 ページ), (韓国語）クイック・スタート・マニュアル (36 ページ), (韓国語）クイック・スタート・マニュアル (28 ページ)

Select AV using the SOURCE .

Note

The LCD Display has AV connection terminals to connect AV input devices like DVDs, VCRs

or Camcorders. You may enjoy AV signals as long as the LCD Display is turned on.

Connecting to a Camcorder

Locate the AV output jacks on the camcorder. They are usually found on the side or back

of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on

the camcorder and the AV AUDIO IN [L-AUDIO-R] on the LCD Display .

Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV

IN [VIDEO] on the LCD Display .

Select AV for the Camcorder connection using the Source button on the front of the LCD

Display or on the remote control.

Then, start the Camcorders with a tape inserted.

Note

The audio-video cables shown here are usually included with a Camcorder. (If not, check

your local electronics store.) If your camcorder is stereo, you need to connect a set of two

cables.

Connections