- ページ 10

モニター Samsung 820DXn - SyncMaster - 82" LCD Flat Panel DisplayのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Samsung 820DXn - SyncMaster - 82" LCD Flat Panel Display 21 ページ。 Quick guide (korean)
Samsung 820DXn - SyncMaster - 82" LCD Flat Panel Display にも： (クイック・スタート・ガイド (20 ページ), (韓国語）クイック・スタート・マニュアル (20 ページ)

ページを印刷する

Using a Power cord with Earth

In the event of failure, the earth lead may cause electric shock. Make sure to wire the earth lead in

correctly, before connecting the AC power. When un-wiring the earth lead, make sure to disconnect

the AC power in advance.

Note

• AV input devices such as DVD players, VCR's or camcorders as well as your computer can be connected

to the LCD Display. For detailed information on connecting AV input devices, refer to the User Controls

under Adjusting Your LCD Display.

Connecting a Computer

Connect the power cord for your LCD Display to the power port on the back of the LCD Display.

Trun on the power switch.

There are 3 ways to connect the D-sub to your LCD Display.

Choose one of the following:

2-1)

Using the D-sub (Analog) connector on the video card.

Connect the D-sub to the 15-pin, RGB port on the back of your LCD Display and the 15 pin D-

sub Port on the computer.

2-2)

Using the DVI (Digital) connector on the video card.

Connect the DVI Cable to the DVI(HDCP) port on the back of your LCD Display and the DVI port

on the computer.

2-3)

Using the BNC (Analog) connector on the video card.

Connect the BNC Cable to the BNC/COMPONENT IN - R, G, B, H, V ports on the back of your

LCD Display and the 15 pin D-sub Port on the computer.