- ページ 37
モニター Samsung 933HD - SyncMaster Plus - 18.5" LCD MonitorのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Samsung 933HD - SyncMaster Plus - 18.5" LCD Monitor 43 ページ。 Samsung lcd tv monitor user manual
ページを印刷する
Problem
Black bars on the screen.
Picture has a Red/Green or Pink tint.
Closed Captioning not working.
Snowy picture.
Ghosting on picture.
Screen is black and power indicator
light blinks steadily.
Image is not stable and may
appear to vibrate when you have
a computer connected to the PC
input.
Image is not centered on the
screen.
The picture appears distorted in the
corner of the screen.
The 'Resets all settings to the
default values.' message appears.
This TFT LCD panel uses a panel consisting of sub pixels (3,133,440) which require
N
sophisticated technology to produce. However, there may be few bright or dark pixels on the
screen. These pixels will have no impact on the performance of the product.
BN59-00905F_eng.indd 35
Possible Solution
Make sure the broadcast you're receiving is High Definition (HD).
HD channels sometimes broadcast Standard Definition
(SD) programming, which can cause black bars.
Set your cable/satellite box to stretch or widescreen mode
to eliminate the bars.
Make sure the Component cables are connected to the correct jacks.
If you are using a Cable/Satellite box, you must set Closed
Captioning on the box, not your TV.
Your cable box may need a firmware upgrade. Please
contact your Cable company.
This is sometimes caused by compatibility issues with your cable box.
Try connecting Component cables instead.
On your computer check: Power, Signal Cable.
The TV is using its power management system.
Move the computer's mouse or press any key on the keyboard.
If the setting is not correct, use your computer utility
program to change the display settings.
Your TV supports multiscan display functions within the
following frequency domain:
- Horizontal frequency (kHz): 30 ~ 81 kHz
- Vertical frequency (Hz): 56 ~ 75 Hz
- PC Maximum refresh rate (at 60 Hz): 1360 X 768
Adjust the horizontal and vertical position.
The screen position must be adjusted on the output source
(i.e. STB) with a digital signal.
If "Screen Fit" is selected with some external devices, the
picture may appear distorted in the corner of the screen.
This symptom is caused by the external devices, not TV.
This appears when you press and hold the EXIT button for a
while. The product settings are reset to the factory defaults.
English - 35
2009-11-10 9:30:45