- ページ 20
IP電話 Cisco 522のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 522 40 ページ。 Ip phones with multiplatform firmware
Cisco 522 にも： ユーザーマニュアル (46 ページ), 管理マニュアル (48 ページ), インストレーション・マニュアル (39 ページ), マニュアル (24 ページ)
ページを印刷する
Headset Parameters on Cisco Unified Communications Manager
Step 4
Navigate to the Product Specific Configuration Layout pane and set the fields.
Step 5
Check the Override Common Settings check box for any changed fields.
Step 6
Click Save.
Step 7
Click Apply Config.
Step 8
Restart the phone.
Headset Parameters on Cisco Unified Communications Manager
The following table describes the fields in the Product Specific Configuration Layout pane that control headset
use.
Table 11: Product Specific Configuration Fields for Headsets
Field Name
Disable
Speakerphone
and Headset
Disable Handset
Wireless
Headset
Hookswitch
Control
Wideband
Headset
Wideband
Headset UI
Control
Wi-Fi
Headsets
20
Field Type or
Default
Choices
Check box
Unchecked
Checkbox
Unchecked
Disabled
Disabled
Enabled
Disabled
Enabled
Enabled
Disabled
Enabled
Enabled
Disabled
Enabled
Enabled
Description and Usage Guidelines
Turns off the speakerphone and headset capability of
the phone.
Turns off the handset audio path.
Note
This parameter is removed from Cisco
Unified Communications Manager
Software Release 12.5(1)SU2 and later.
Enables users to remotely control basic IP phone
functionality from the wireless headset. Basic IP
phone functionality includes off-hook and on-hook,
ring indication, audio volume control, and mute.
To use a wireless headset, users connect a base station
to the auxiliary port. The base station communicates
with the wireless headset.
Enables or disables the use of a Wideband Headset
on the phone. Used in conjunction with User Control
Wideband Headset.
For more information, see
Set Up Wideband Codec,
on page
21.
Allows the user to use the wideband codec for an
analog headset.
Enables the Cisco IP Phones 8861 and 8865 to connect
to the Wi-Fi network.
Phones that do not support this feature do not display
the field.
Headsets