- ページ 4
プロジェクター Epson 5550C - PowerLite SVGA LCD ProjectorのPDF 製品情報をオンラインで閲覧またはダウンロードできます。Epson 5550C - PowerLite SVGA LCD Projector 6 ページ。 Epson technical brief for multimedia projectors
Epson 5550C - PowerLite SVGA LCD Projector にも： 仕様 (2 ページ), ユーザーマニュアル (1 ページ), 技術概要 (7 ページ)
ページを印刷する
EPSON PowerLite 5550C/7550C Multimedia Projector
This table summarizes the functions on the remote control.
Button
Function
Source
Switches input source between computer and video.
Menu
Displays or hides the active menu. When a submenu is
displayed, returns to the main menu.
Effects buttons
Press each Effects button to use its assigned function.
The function may be a factory default, or you can assign
a new one with the optional ELP Link III software.
Pointer button
Lets you navigate the menus. Press left or right to select
menu options. Can also be used as a mouse pointer in
place of the computer's mouse pointer. (The projector
must be connected to the computer with the mouse
cable included with the projector, or with the ELP Link III
mouse cable.)
Top multi-
Acts as a right mouse click. Press to open submenus.
purpose button
Bottom multi-
Acts as a left mouse click. Press to open submenus.
purpose button
AV/Mute
Turns the projector's audio and video output off and back
on again—clears all special effects and displays a black,
blue, or user-defined logo screen.
Resize
Resizes the image on screen to match the resolution of
your computer display.
Custom
Lets you zoom the image using the top (zoom out) and
bottom (zoom in) multi-purpose buttons.
Freeze
Keeps the current computer or video image on the
screen until pressed again.
Help
Displays the Help menu.
– Volume +
Adjusts the volume.
Power
Turns the projector lamp on or off.
Using the Control Panel
Although you must use the remote control to access custom
features, such as functions assigned to the Effects buttons, you
can use the control panel to perform most standard
operations, such as selecting menu options, adjusting volume,
or resizing the image on the screen.
4 - PowerLite 5550C/7550C Multimedia Projector
The following table summarizes the functions on the control
panel.
Button
Power
Source
Menu
Up, down arrows
(Sync+/Sync-)
Left, right arrows
(Tracking-/
Tracking+)
Enter
Resize
AV/Mute
– Volume +
Help
Projector Status Lights
The status lights on top of the projector tell you about its
operating status.
Caution: A red indicator warns you if a serious problem occurs.
Power Light
Enter button
Light status
Steady orange
Steady green
Flashing green
Flashing orange
Off
9/99
Function
Turns the projector lamp on or off.
Switches the input source between computer and
video.
Displays or hides the active menu.
Adjusts projector to match computer signal. Also lets
you navigate menus.
Correct vertical fuzzy lines by matching the
projector's internal clock to various computer graphic
signals (tracking adjustment). Change menu settings.
Selects a menu option.
Resizes the image on the screen to match the
resolution of your computer display.
Turns the projector's audio and video output off and
back on again—clears special effects and displays a
black, blue, or user-defined logo screen.
Adjusts the volume.
Displays the Help menu.
power light
projector lamp light
temperature light
Meaning
The projector is in sleep mode. (It is plugged in, but not
projecting.)
Power and projector lamp are on.
The projector is warming up. Allow about 30 seconds.
The projector is cooling down.
There is an internal projector problem, or the power to
the projector has been cut off.