- ページ 27

IP電話 Cisco 6901 StandardのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 6901 Standard 28 ページ。 Unified ip phone
Cisco 6901 Standard にも：データシート (5 ページ), 管理マニュアル (10 ページ), ユーザーマニュアル (15 ページ), 管理マニュアル (12 ページ), ユーザーマニュアル (50 ページ), マニュアル (10 ページ)

ページを印刷する

Cisco Unified IP Phone

Procedure

Step 1

Choose the power source for the phone:

• Power over Ethernet (PoE)

• External power supply

Determines how the phone receives power. For more information, see

Step 2

Assemble the phone, adjust phone placement, and connect the network cable.

Locates and installs the phone in the network. See

See

Footstand, on page

Step 3

Monitor the phone startup process. Associates directory numbers to the phone and verifies that phone is

configured properly.

See

Phone Startup

Step 4

If you are configuring the network settings on the phone, you can set up an IP address for the phone by either

using DHCP or manually entering an IP address.

• Using DHCP

Verify that the phone has DHCP enabled using the IVR. You can set an alternate TFTP server by entering

the IP address for the TFTP when prompted by the IVR.

Note

• Without DHCP

Verify that the phone has DHCP disabled using the IVR. You must then configure the IP address, subnet

mask, TFTP server, and default router locally by using the IVR on the phone.

For more information, see

Step 5

Set up security on the phone.

Provides protection against data tampering threats and identity theft of phones.

For more information, see

Step 6

Make calls with the Cisco Unified IP Phone. Verifies that the phone and features work correctly. For more

information, see Cisco Unified IP Phone 6901 and 6911 User Guide for Cisco Unified Communications

Manager (SCCP and SIP).

Step 7

Provide information to end users about how to use their phones and how to configure their phone options.

Ensures that users have adequate information to successfully use their Cisco Unified IP Phones.

See

Internal Support Web Site

Verification.

Consult with the network administrator to determine whether you need to assign an alternative

TFTP server instead of using the TFTP server assigned by DHCP.

Network Settings

Cisco Unified IP Phone

Install Cisco Unified IP Phone 6901 and 6911

Cisco Unified IP Phone

Install Cisco Unified IP

and

Cisco Unified IP Phone Network Settings

Security.

Power.

Phone.

Setup.

Cisco Unified IP Phone