- ページ 5

セキュリティシステム Digital Guard Dawg Watch Dawg-X2のPDF 機能と操作説明をオンラインで閲覧またはダウンロードできます。Digital Guard Dawg Watch Dawg-X2 6 ページ。

When the battery in your transmitter gets low, it will make a distinct tone after pressing any of the

buttons to remind you to replace the batteries soon.

Setting the Time on your remote

Press the LOCK (lock icon) and UNLOCK (unlock icon) buttons simultaneously for 1s, the transmitter will

beep, and the word "hour" will flash. Then press the LOCK (lock Icon) button to switch between "Hour"

and "Minute". Press the UNLOCK (unlock icon) button to select the time. After setting is complete press

the LOCK (lock icon) and UNLOCK (unlock icon) buttons simultaneously to save the time entered.

Learning New Transmitters

Turn the key from OFF to ON eight times and leave the key inserted. The LED will be illuminated, press

any key of the first transmitter within 8 seconds, the horn will make two beeps indicating the

transmitter has been learned, if learning an additional transmitter press a button on the additional

transmitter within 8 seconds of the two beeps of the horn from the first transmitter. After 30 seconds

the alarm will exit remote learning mode.

Each alarm can only learn 2 transmitters

Warranty Statement