- ページ 19

IP電話 Cisco 7811のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 7811 27 ページ。 Mpp phones
Cisco 7811 にも：ファームウェア移行マスターマニュアル (31 ページ), スタート (6 ページ), インストレーション・マニュアル (39 ページ), マニュアル (20 ページ), 再設定マニュアル (2 ページ), はじめに (2 ページ), クイック・リファレンス・カード (2 ページ), クイック・スタート・マニュアル (2 ページ)

Wall Mounts

Figure 21: Side View of ADA Non-Lockable Wall Mount Kit Installed on Phone

Install the Non-Lockable Wall Mount Kit for 7861

The wall mount kit can be mounted on most surfaces, including concrete, brick, and similar hard surfaces.

To mount the kit on concrete, brick, or similar hard surfaces, you must provide the appropriate screws and

anchors for your wall surface.

Before you begin

You need these tools to install the bracket:

• #1 and #2 Phillips-head screwdrivers

• Level

• Pencil

You must also install an Ethernet jack for the phone in the desired location if an Ethernet jack does not currently

exist. This jack must be wired appropriately for an Ethernet connection. You cannot use a regular phone jack.

Procedure

Step 1

Mount the wall bracket in the desired location. You can install the bracket over an Ethernet jack, or you can

run the Ethernet network cable to a nearby jack.

Note

If the jack is to be placed behind the phone, the Ethernet jack must be flush to the wall or recessed.

Install the Non-Lockable Wall Mount Kit for 7861

Wall Mounts