- ページ 7

プロジェクター Epson 7850p - PowerLite XGA LCD ProjectorのPDF 製品情報マニュアルをオンラインで閲覧またはダウンロードできます。Epson 7850p - PowerLite XGA LCD Projector 25 ページ。 Release of check tool for network projectors v1.00 for windows
Epson 7850p - PowerLite XGA LCD Projector にも： ユーザーマニュアル (42 ページ), 操作マニュアル (36 ページ), ユーザーマニュアル (12 ページ), 交換部品 (1 ページ), 操作マニュアル (47 ページ), 製品サポート速報 (30 ページ), インストレーション・マニュアル (5 ページ), クイックセットアップ (2 ページ), パンフレット＆スペック (2 ページ), 技術概要 (7 ページ), 製品サポート速報 (25 ページ), 製品サポート速報 (38 ページ), 製品サポート速報 (12 ページ), 製品サポート速報 (42 ページ), 製品サポート速報 (22 ページ), 製品サポート速報 (28 ページ), 製品サポート速報 (41 ページ), 製品サポート速報 (34 ページ), 製品サポート速報 (38 ページ), 製品サポート速報 (28 ページ), 製品サポート速報 (15 ページ), 製品サポート速報 (22 ページ)

ページを印刷する
Epson 7850p - PowerLite XGA LCD Projector 製品情報マニュアル
EPSON PowerLite 7850p Projector
2. Press the corresponding
control to switch to the desired source. Or press the
button to exit the preview screen without switching sources.
Note: A red border surrounds the preview window for the
currently selected source. You can use the
on the remote control to select a different source, and then
press
to display it.
Enter
What To Do If You See a Blank Screen
If you see a blank screen or a blue screen with the message
No Signal after turning on your computer or video source,
try the following:
❏ Make sure the cables are connected correctly.
❏ Make sure the power light is green and not flashing and the
lens cover is off.
❏ Try restarting your computer.
❏ Press the correct
Source
on the remote control. (Allow a few seconds for the
projector to sync up after pressing the button.)
If you're using a PC laptop:
❏ Hold down the Fn key and press the function key that lets
you display on an external monitor. It may have an icon
such as
or it may be labeled
seconds for the projector to sync up after pressing it. Check
your laptop's manual or online help for details.
On most systems, the
toggle between the LCD screen and the projector, or
display on both at the same time.
❏ Depending on your computer's video card, you might need
to use the Display utility in the Windows
make sure that both the LCD screen and external monitor
port are enabled. See your computer's documentation or
online help for details.
If you're using a laptop with Macintosh OS X:
You may need to set up your system to display on the
projector screen as well as the LCD screen. Follow these steps:
1. From the Apple menu, select
select
.
Displays
2. Make sure the
VGA Display
3. Click the
tab.
Arrange
6
EPSON PowerLite 7850p Projector
-
button on the remote
Source
pointer button
button on top of the projector or
. Allow a few
CRT/LCD
or
key lets you
CRT/LCD
Control Panel to
®
System Preferences
dialog box is selected.
ESC
Make sure
Mirror Displays
is checked
4. Make sure the
If you're using a laptop with Macintosh
You may need to set up your system to display on the
projector screen as well as the LCD screen. Follow these steps:
1. From the Apple menu, select
Monitors
2. Click the
Click here
Drag one monitor
icon on top of the
other
3. Drag one monitor icon on top of the other.
If the
Arrange
1. Click the
Click here
, then
2. Select a Simulscan resolution as shown. (Allow a few
seconds for the projector to sync up.)
6/03
checkbox is selected.
Mirror Displays
Control Panels
or
.
Monitors and Sound
icon.
Arrange
option isn't available, do the following:
icon if necessary.
Monitor
Select the
VGA Display
dialog box
®
OS 9.x:
, then click
Select a
Simulscan
resolution