- ページ 6
プロジェクター Epson 8100i - PowerLite XGA LCD ProjectorのPDF 製品情報マニュアルをオンラインで閲覧またはダウンロードできます。Epson 8100i - PowerLite XGA LCD Projector 13 ページ。 Product support bulletin(s)
Epson 8100i - PowerLite XGA LCD Projector にも： 通信マニュアル (20 ページ), ユーザーマニュアル (1 ページ), 仕様書 (2 ページ), 技術概要 (7 ページ), 製品サポート速報 (1 ページ)
ページを印刷する
EPSON PowerLite 8100i/9100i Projector
Extra Long Throw Zoom Lens (ELPLL03)
To determine the diagonal size of an image when you know
the projection distance:
Inches:
Maximum diagonal size = (0.231 projection distance) + 2.2
Minimum diagonal size = (0.171 projection distance) + 1.7
Centimeters:
Maximum diagonal size = (0.231 projection distance) + 5.7
Minimum diagonal size = (0.171 projection distance) + 4.2
To determine the projection distance when you know the
diagonal size of the screen image:
Inches:
Maximum projection distance = (4.331 diagonal size) – 9.7
Minimum projection distance = (5.850 diagonal size) – 9.7
Centimeters:
Maximum projection distance = (4.331 diagonal size) – 24.6
Minimum projection distance = (5.850 diagonal size) – 24.6
Short Throw Zoom Lens (ELPLW01)
To determine the diagonal size of an image when you know
the projection distance:
Inches:
Maximum diagonal size = (0.876 projection distance) + 3.8
Minimum diagonal size = (0.730 projection distance) + 3.0
Centimeters:
Maximum diagonal size = (0.876 projection distance) + 9.6
Minimum diagonal size = (0.730 projection distance) + 7.7
To determine the projection distance when you know the
diagonal size of the screen image:
Inches:
Maximum projection distance = (1.369 diagonal size) – 4.1
Minimum projection distance = (1.142 diagonal size) – 4.3
Centimeters:
Maximum projection distance = (1.369 diagonal size) – 10.5
Minimum projection distance = (1.142 diagonal size) – 11.0
Fixed Short Throw Lens (ELPLR01)
To determine the diagonal size of an image when you know
the projection distance:
Inches:
Diagonal size = (1.239
Centimeters:
Diagonal size = (1.239
To determine the projection distance when you know the
diagonal size of the screen image:
Inches:
Projection distance = (0.807
Centimeters:
Projection distance = (0.807 diagonal size) – 7.0
6 - EPSON PowerLite 8100i/9100i
projection distance) + 3.4
projection distance) + 8.7
diagonal size) – 2.8
Selecting the Video Source
If the projector is connected to more than one computer and/
or video source, you can use the buttons on the remote control
or the control panel to switch between the different sources.
On the control panel, press the
between the computer sources and press the
switch between standard (composite) video, S-Video, and
component video (BNC).
On the remote control:
Press the
button to switch between a standard
Video
composite video source and an S-Video source.
Press the
button to select the Computer 1 source.
Comp1
Press the
Comp2/YCbCr
component video source.
After you select a source, the screen goes dark for a moment
before the image appears.
What To Do If You See a Blank Screen
If you see a blank screen or a blue screen with the message
after turning on your computer or video source, do
No Signal
one of the following:
Make sure the cables are connected correctly.
Make sure the power light is green and not flashing and the
lens cap is off.
If you've connected more than one computer and/or video
source, you may need to press the
button on top of the projector to select the correct source.
Try restarting your computer.
If you're using a PowerBook:
You may need to set up your system to display on the
projector screen as well as the LCD screen. Follow these steps:
1. From the Apple menu, select
Monitors and Sound
2. Click the
Arrange
3. Drag one monitor icon on top of the other.
If this option isn't available, you may need to select one of the
Simulscan resolution settings:
1. Click the
Monitor
2. Select a
Simulscan
projector to sync up after making the selection.)
3/01
button to switch
Computer
Video
to select the Computer 2 or
or
Computer
, then click
Control Panels
.
icon.
icon.
resolution. (Allow a few seconds for the
button to
Video