- ページ 25

コントロールユニット Siemens XC1005-AのPDF オペレーションをオンラインで閲覧またはダウンロードできます。Siemens XC1005-A 32 ページ。 Extinguishing control unit

Maintenance

6.1

6.1.1

6.1.2

6.2

6.3

6.4

Building Technologies

Fire Safety

Once a week

Check that all leds and buzzer are activated with the "Led test"

Every 6 months

Check all alarm sounders and illuminated warning panels

Check the Remote transmission connection

The maintenance operation of an extinguishing installation must be performed by

a qualified and trained technician who is familiar with XC10 control panel and

knows all the risks relating to extinguishing.

Detailed actions are described in the technical manual

1. Press the key « Lamp test » (9) and check that:

all Led light up

internal buzzer sounds

all display segments light up and software version appears (requires plastic

cover remove for XC1001-A )

1. Enable operating access level 2

2. Press and hold down « Key 1 » on numeric keypad then press key « Silence/Re-

sound sounders » (5) within 5 seconds:

sounders are enabled for 30 seconds

« Sounder » Led (19) flashes slowly

3. Press « Lamp test » key (9) to end the test before 30 seconds, if necessary

1. Enable operating access level 2

2. Press and hold down « key 2 » on numeric keypad then press key « Silence/Re-

sound sounders » (5) within 5 seconds:

optical warning panels are activated for 30 seconds

Maintenance

A6V10257477_c_en_--

2012-06