- ページ 12

オーブン Siemens CB634GB 3 SeriesのPDF ユーザーマニュアルと設置手順をオンラインで閲覧またはダウンロードできます。Siemens CB634GB 3 Series 32 ページ。
Siemens CB634GB 3 Series にも： ユーザーマニュアルと設置手順 (32 ページ)

ページを印刷する
en Time-setting options
10.2 Setting the timer
The timer runs independently during the operation. The
timer can be set when the appliance is switched on or
off, up to 24 hours. The timer has its own audible sig-
nal so that you can tell whether it is the timer or a
cooking time that has elapsed.
Press
⁠ .
1.
a The field for the timer opens.
Use the rotary selector to set the timer duration.
2.
a The timer starts automatically after a few seconds.
a The
symbol and the time counting down are dis-
played on the left in the status bar.
a The timer counts down.
a When the timer duration has elapsed, a note ap-
pears on the display and an audible signal sounds.
Once the timer duration has elapsed:
3.
Press
to silence the audible signal manually.
‒
To set another timer, press
‒
selector to set the duration.
Changing the timer
You can change the timer duration at any time.
Press
⁠ .
1.
2.
Use the rotary selector to change the timer duration.
Press
to confirm.
3.
Cancelling the timer
You can cancel the timer duration at any time.
1.
Press
⁠ .
Use the rotary selector to reset the timer duration to
2.
zero.
Press
to confirm.
3.
10.3 Setting the cooking time
You can set a cooking time for operation of up to 23
hours 59 minutes.
Requirement: The type of heating and a temperature
or setting have been set.
Press
⁠ .
1.
a The time-setting options menu opens.
Use the rotary selector to set the cooking time.
2.
Rotation direction
Left
Right
The cooking time can be set in one-minute incre-
ments up to one hour, and then in five-minute incre-
ments. The end time is calculated automatically.
Press
to start the operation.
3.
a The appliance starts to heat and the time starts to
count down.
a Once the cooking time has elapsed, an audible sig-
nal sounds. The duration on the status line is zero.
Once the cooking time has elapsed:
4.
Press
to silence the audible signal manually.
‒
To set another cooking time, press
‒
the rotary selector to set the cooking time.
To continue without setting a cooking time, press
‒
⁠ .
When the food is ready, press
‒
appliance off.
12
and use the rotary
Default value
10 minutes
30 minutes
and use
to switch the
Changing the cooking time
You can change the cooking time at any time.
Press
⁠ .
1.
Use the rotary selector to change the cooking time.
2.
Then press
3.
Cancelling the cooking time
You can cancel the cooking operation time at any time.
Press
⁠ .
1.
Use the rotary selector to reset the cooking time to
2.
zero.
To continue without setting a cooking time, press
3.
‒
⁠ .
The type of heating and temperature settings are
shown in the display.
10.4 Setting the end time
You can delay the time at which cooking is due to fin-
ish by up to 23 hours and 59 minutes.
Notes
¡ In order to achieve good cooking results, do not
delay the end time once the appliance is operating.
¡ Food will spoil if you leave it in the cooking com-
partment for too long.
Requirements
¡ The type of heating and a temperature or setting
have been set.
¡ A cooking time is set.
Press
⁠ .
1.
Press
to continue to "
2.
To set a later end time, turn the rotary selector.
3.
Press
to start the operation.
4.
a The
symbol and the time at which the operation
will be finished appear in the status bar. The appli-
ance is in standby mode.
a Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down in the status bar.
a Once the cooking time has elapsed, an audible sig-
nal sounds. The time shown in the display is zero.
Once the cooking time has elapsed:
5.
Press
to silence the audible signal manually.
‒
To set another cooking time, press
‒
the rotary selector to set the cooking time.
To continue without setting a cooking time, press
‒
⁠ .
When the food is ready, press
‒
appliance off.
Changing the end time
The set end time can only be changed when the oven
is in standby mode.
1.
Press
to pause operation.
Press
⁠ .
2.
a The time-setting options menu opens.
Press
⁠ .
3.
Turn the rotary selector to change the end time.
4.
Press
to resume operation.
5.
Cancelling the end time
The set end time can only be changed when the oven
is in standby mode.
Press
to pause operation.
1.
twice.
End".
and use
to switch the