- ページ 10
オーブン Siemens CB734G1 1 SeriesのPDF ユーザーマニュアルと設置手順をオンラインで閲覧またはダウンロードできます。Siemens CB734G1 1 Series 36 ページ。
ページを印刷する
en Before using for the first time
7 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
7.1 Performing initial start-up
After connecting the appliance to the power supply,
you must configure the settings for its initial start-up. It
may take a few minutes for the settings to appear on
the display.
Note: You can also use the Home Connect app to con-
figure the settings. When your appliance is connected,
follow the instructions in the app.
Press
to switch the appliance on.
1.
a The first setting appears.
If required, change the setting.
2.
Possible settings:
– Language
– Home Connect
– Time
– Date
3.
Use
to switch to the next setting.
Work through the settings and make changes as re-
4.
quired.
a After the last setting, a message appears on the dis-
play confirming that the initial start-up is complete.
To check the appliance before heating for the first
5.
time, open and close the appliance door once.
8 Basic operation
8.1 Switching on the appliance
Press
to switch the appliance on.
▶
a The display shows the menu.
8.2 Switching off the appliance
Switch your appliance off when you are not using it.
The appliance automatically switches itself off if it is not
used for a certain period of time.
Press
to switch the appliance off.
▶
a The appliance switches off. Any functions currently
in progress are cancelled.
a The time or residual heat indicator appears on the
display.
8.3 Starting the operation
You must start each operation.
Use
to start the operation.
▶
a The settings appear on the display.
8.4 Interrupting the operation
You can interrupt the operation and then continue
again.
To interrupt the operation, press
1.
10
7.2 Cleaning the appliance before using it
for the first time
Before using the appliance to cook food for the first
time, you must clean the cooking compartment and ac-
cessories.
1.
2.
3.
4.
5.
a Once the cooking time has elapsed, a signal tone
6.
7.
8.
2.
8.5 Setting an operating mode
After you have switched on the appliance, the menu
appears on the display.
1.
2.
a Depending on the function, possible adjustment val-
3.
4.
5.
6.
Tip: You can save your settings as "Favourites"
use these again.
→ "Favourites", Page 14
.
Remove the product information and the accessor-
ies from the cooking compartment. Remove any
leftover packaging, such as polystyrene pellets, and
any adhesive tape either in or on the appliance.
Wipe the smooth surfaces in the cooking compart-
ment with a soft, damp cloth.
Press
to switch the appliance on.
Apply the following settings:
Type of heating
Temperature
Cooking time
→ "Basic operation", Page 10
Start the operation.
Ventilate the kitchen while the appliance is heat-
‒
ing.
sounds. A note appears on the display confirming
that the operation has finished.
Press
to switch the appliance off.
Once the appliance has cooled down, clean the
smooth surfaces in the cooking compartment with a
detergent solution and a dish cloth.
Clean the accessories thoroughly using a detergent
solution and a dish cloth or soft brush.
Press
again to resume operation.
To scroll through the various options, press or .
To select a function, press the corresponding tile.
ues or other tiles are available for selection.
If required, press on another tile.
To change the adjustment values:
Press
or
.
‒
Or select the values directly using the adjustment
‒
bar.
Use
to start the operation.
If the operation is ended:
If required, you can implement other settings and
‒
restart the operation.
When the food is ready, use
‒
pliance off.
2D hot air
Maximum
1 hour
to switch the ap-
and