- ページ 18
オーブン Siemens HB213AB 0 SeriesのPDF ユーザーマニュアルと設置手順をオンラインで閲覧またはダウンロードできます。Siemens HB213AB 0 Series 28 ページ。
ページを印刷する
en Troubleshooting
Push the intermediate pane upwards until it is in the
4.
left- and right-hand retainers .
Slide the inner pane into the left- and right-hand re-
5.
tainers .
14 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
If the appliance is defective, call Customer Service.
▶
14.1 Malfunctions
Fault
The appliance is not
working.
18
Cause and troubleshooting
The circuit breaker in the fuse box has tripped.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your kitchen or other appliances are working.
▶
Electronics fault
Briefly disconnect the appliance from the power supply by switching off the fuse.
1.
2.
Reset the basic settings to the factory settings.
Push the inner pane upwards until it is in the left-
6.
and right-hand retainers .
Put the door cover in position
7.
it until you hear it click into place.
Open the appliance door fully.
8.
Close the locking levers on the left- and right-hand
9.
hinges .
a The locking levers are closed. The appliance door is
secured and cannot be detached.
Close the appliance door.
10.
Note: Do not use the cooking compartment again until
the door panes have been correctly fitted.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
Only use genuine spare parts when repairing the
▶
appliance.
If the power cord of this appliance is damaged, it
▶
must be replaced by trained specialist staff.
and push down on